Play games and win money

How to Upgrade your Builder Grade Mirror Frame it!

How to Upgrade your Builder Grade Mirror Frame it!

I love framed mirrors in the bathroom but I really dont like the idea of ripping out a large builder mirror to replace it with a smaller framed one. Not only is it hurting the environment, it hurts my pocket book. So at our first house we framed our builder grade mirror with some cheap MDF molding and ever since, we have been hooked on this cheap, but with a huge impact, solution.

I saw on Our Suburban Cottage, over a year ago, an amazing mirror that she created in her bathroom. Using her design, my husband was able to create this stunning addition to our master bathrooms mini-reno. I fully intend to redo everything out of this bathroom when time and money permits; but for now we had to do cosmetic changes that have made this bathroom livable for a few years.

We did two bathrooms with this type of frame. This bathroom mirror is between 2 walls so I will give these instructions. When I have some time I will show you how to do a bathroom mirror that is not butted against two walls.

Before (when we bought the house):
Materials needed:
1x4 MDF trim (to go the entire way around the mirror)
Thin trim with one side rounded (2 times the width of the mirror)
Crown molding (the width of the mirror)
Paint
Liquid nails (be sure it adheres to glass!)
Caulking

Method:
Paint all the trim both back and front. You might not think of painting the back side, but take my word, you will see the reflection of the back side in the mirror.  I spray painted the trim and I loved the smooth look; I personally have issues with getting my paint smooth so this was my only option.

Measure (twice) the width of the mirror and cut 2 pieces of 1x4 trim and the rounded trim. Paint the ends that have been cut.

We then secured the one 1x4 and rounded trim to the bottom of the mirror. We used liquid nails to attach the peice to the mirror and used my sons lego as a support it until it was dry.

After determining exactly where we wanted the top of the frame to be, we measure the distance between the top and the bottom molding and then cut two 1x4 pieces for the sides. These two pieces were then glued to the mirror tight against the bottom piece.

With the second glued "trim to 1x4", we flipped it and glued the crown molding to the opposite side of the 1x4. Once set, this piece was then glued to the top of the mirror. We did put a couple triangle pieces on the back of the crown to give it additional support, but this is optional.

My husband caulked the seams to make it the frame seamless and not look like pieces of wood.

Isnt it absolutely AMAZING!?!?  I think in total it cost under $30 to do this frame. Worth every penny in my opinion.
 In total for this mini-renovation we painted the entire bathroom, framed the mirror, replaced the counter top with an in stock piece from Lowes, bought two beautiful raised sinks on clearance at Lowes, purchased 2 new lights from a cheap local store, made some roman blinds out of a scrap curtain and bought a couple new faucets.  These simple things have made a huge difference. I still hate the shower but I can live with it for a few more years :)

Oh and I almost forgot...I made a pendant lamp that hangs above our large soaker tub from a really cheap lamp shade ($10 at Walmart) and a pendant kit from Lowes. I love it too :) It has one low watt bulb it in which is great when you are soaking in the tub. Not much brighter than a few candles but enough to read by.
What do you think? I love it every day I walk into the bathroom.

Answers to the clip questions: There have been questions about the clips holding the mirror on the wall. On all of our mirrors, we have flush/flat metal hooks that holds the mirror to the wall. You can see the metal clip on the photo below, it is immediately below the light. We were able to put the molding right over the hooks without a problem. We know that when we want to remove the mirror we will have to destroy it..the builder glued it to the drywall. If you have the plastic hooks that are not flush (with the screw through them) you will not be able to do this unless you replace them.





go to link download